Precautions:

  1. Do not charge the battery when you are away from home, do not charge the battery immediately after flying, and do not over-discharge the battery (over-discharge may cause the battery to fail to be charged and become obsolete). After the battery is fully charged, the battery should be cut off in time and cannot be charged for a long time. .

  2. Do not modify any parameters and wiring without knowing the flight control and remote control.

  3. Turn on the remote control before powering on the aircraft, unplug the power switch after the flight, and then turn off the remote control to prevent accidents.

  4. This product is not a toy and is not suitable for children under 14 years of age.

  5. If you are a beginner, it is recommended to be assisted by an experienced adult

  6. Novices should pay attention to not holding the airplane by hand when the airplane is turning, and don't let children touch it. Prevent being scratched.

  7. Please turn off the start switch in time when the aircraft falls from a wall or hits other objects during flight, otherwise it may cause damage to the flight control motor. Check whether the aircraft is damaged, whether the screws are loose, and wait until everything is normal before taking off again.

  Functions and features:

  220mm wheelbase

  Built-in OSD Betaflight

  Support BLHeliSuit configuration

  Support voltage 3-4S

  7-10 minutes of flight time

  Remote control distance (with FLYSKY remote control) about 400 meters

  Paddle:

  Model: 5043

  Pitch: 4.3 inches

  Material: PC

  Weight/G: 4.63G

  Inner diameter of center hole: 5mm

  Paddle diameter: 13.5mm

  Center thickness: 7mm

  ESC:

  Working voltage: 2-6S

  Maximum continuous working current: 45A

  Maximum instantaneous working current: 50A

  Support communication modes: DShot150/300/600, PWM, Oneshot125, Oneshot42 and Multshot

  Firmware version: BL16.7

  Installation hole distance: 20 * 20mm / 30.5 * 30.5mm

  Product size: 44 * 44 * 5.5

  Packing size in mm: 62 * 58 * 18 mm

  Product net weight: 13.6 grams

  Package weight: 27 grams

  Image transmission:

  Weight: 12g

  Input voltage range: 7-24V

  Frequency: 48CH

  Output power: 0mW / 25mW / 100mW / 200mW / 400mW / 600mW switchable

  Transmission distance: ≥0.5km25mW, ≥1km200mW, ≥2km600mW

  Installation size: 30.5*30.5mm

  Motor:

  Size: 2205

  Stator diameter: 22 mm

  Stator height: 5 mm

  Motor KV: 2300

  Weight: 29g

  Support voltage: 3~4S

  Flight control:

  Name: F4 V2

  Size: 36x36mm

  Mounting hole: 30.5x30.5mm

  STM32 F405 MCU can shorten the cycle time.

  Support SBUS / PPM / IBUS receiver mode

  Built-in power module BEC

  camera:

  Sensor: CMOS 1/3

  Lens: 1.8mm

  Video format: PAL/NTSC switchable

  Resolution: 1200TVL

  Input voltage: DC4.5V-25V

  Weight: 4.5g

  Size: 19x18.7mm(W*L)

  White balance: automatic

  WDR: 90db