Feature:

1. Constant Pressure: Facial oxygen sprayer adopted constant pressure design, more than 120 kpa, make oxygen and nutrients can be injected into the deep skin.   

2. Deep Moisturizing: Handheld facial oxygen injector adopted high pressure to make fine mist, which can provide effective moisturizing and good skin absorption effect.   

3. Small Injection Head: Facial mist sprayer adopted 0.35mm oxygen injection spray, provide smaller molecules, and direct nutrition, just two drops of serum to moist a whole face.   

4. Pores Cleaning: Facial water sprayer with 140KPA high pressure to dredge skin channel, effectively open facial pores and remove accumulated oil, help to promote better absorption.   

5. Use Together: Facial sprayer can be used with many water like skin care products, replenish enough moisture for skin cells, and make skin bright and soft, suitable for all skin types.   

   Specification:

   Item Type: Facial Oxygen Mist Sprayer

Material: ABS

Battery Type: Lithium Battery(Included)

Battery Capacity: 800mah

Color: Red

Gear: 2 Gears

Skin Type: All skin types

   Package List:

   1 x Face Oxygen Injector 

   1 x USB Charging Cable

   2 x Glass Bottle

   2 x Dredging Needles

   2 x Rubber Heads 

   1 x Manual

   Note:

1. The products used in the oxygen injector must be water based products (products with high concentration of contamination must be diluted with mineral water before use). 2. Inject warm water and alcohol once before use (clean the inner wall of the instrument). 3. After each use, warm water must be injected to clean it again, and gas spray for a few seconds to avoid drying and causing blockage or leakage of the instrument. 4. Please clean the funnel cover and glass bottle with clean water after use. 5. Clean the nozzle to avoid clogging after using water based products or high concentration products.  

  How to use:  

1. Put the rubber lid on the bottle. Fill a jar with mineral water or serum in the shape of a skin care product.  2. Turn the machine upside down from bottom to top, and insert the funnel cover into the liquid channel according to turning the glass bottle from bottom to top.  (Note: Avoid gas entry, causing liquid backflow).  3. Open switch on/off. 4. Adjust switch to control the amount of spray.