HT208A/D Professional Digital Clamp Meter Anto-Range 1000A 1000V AC DC Current Clamp True RMS VFD REL Ohm Capacitor NCV Tester
HT208D
This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC voltage, AC/DC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key.
Features:
CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/DC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.
WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery.
MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.
Note:
*MUST read the user manual carefully before use for safety.
*Battery not included.
Parameters:
Display: 6000 count
Clamp Opening Size: 40mm
Auto-off: approx. 15 minutes
Max. Voltage Between Terminals and Earth Ground: AC750V or DC 1000V
Range
Resolution
Accuracy
DC Current (MAX current: 1000A)
60A
0.01A
±(2.5%reading+8)
600A
0.1A
1000A
1A
AC Current (MAX current: 1000A, True RMS)
Frequency range: 0.1~600A: 40Hz~400Hz
600~1000A: 40Hz~60Hz
60A
0.01A
±(2.5%reading+8)
VFD: ±(5.0%reading+10)
INRUSH: ±(5.0%reading+10)
600A
0.1A
1000A
1A
DC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
600mV
0.1mV
±(0.5%reading+5)
6V
0.001V
60V
0.01V
600V
0.1V
1000V
1V
±(0.8%reading+5)
AC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
Frequency range: 40Hz~1kHz, True RMS
600mV
0.1mV
±(0.8%reading+5)
6V
0.001V
60V
0.01V
600V
0.1V
750V
1V
±(1.0%reading+5)
VFD(750V)
0.1V
±(2.0%reading+5)
Resistance
Overload protection: 250V
600Ω
0.1Ω
±(1.0%reading+5)
6kΩ
0.001kΩ
60kΩ
0.01kΩ
600kΩ
0.1kΩ
6MΩ
0.001MΩ
60MΩ
0.01MΩ
Diode
It displays the approximate forward voltage value of the diode.
Forward DC current is about 1.5mA;
Reverse DC voltage is about 3V;
Overload protection: 250V
Continuity
Test Voltage Approx. 1V
Overload protection: 250V
Capacitance
Overload protection: 250V
10nF
0.001nF
±(4.0%reading+5)
100nF
0.01nF
1000nF
0.1nF
10μF
0.001μF
100μF
0.01μF
1000μF
0.1μF
10mF
0.001mF
100mF
0.01mF
±(5.0%reading+10)
Frequency/Duty Ratio
Overload protection: 250V
10Hz
0.001Hz
±(1.0%reading+3)
100Hz
0.01Hz
1000Hz
0.1Hz
10kHz
0.001kHz
100kHz
0.01kHz
1000kHz
0.1kHz
10MHz
0.001MHz
±(3.0%reading+3)
1~99%
0.1%
Temperature
*The below precision does not inlcude the error of thermocouple probe.
℃
1℃
±3℃ (-20℃~0℃)
±1.0% or ±2℃ (0℃~400℃)
±2.0% (400℃~1000℃)
℉
1℉
±6℉ (-4℉~32℉)
±1.0% or 4℉ (32℉~752℉)
±2.0% (752℉~1832℉)
Specifications:
Brand: HABOTEST
Material: ABS
Color: Black and Red
Battery: 2pcs, 1.5V, AAA alkaline battery (batteries not included)
Item Size: 24*8*4.5cm / 9.44*3.14*1.77in
Item Weight: 311g / 10.97oz
Package Size: 27.5*13.5*5.5cm / 10.82*5.31*2.16in
Package Weight: 620g / 21.86oz
Packing List:
1 * Digital Clamp Meter
1 * Thermocouple
2 * Test Lead
1 * User Manual(English)
HT208A
This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC voltage, AC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key.
Features:
CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.
WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery.
MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.
Note:
*MUST read the user manual carefully before use for safety.
*Battery not included.
Parameters:
Range
Resolution
Accuracy
AC Current (MAX current: 1000A, True RMS)
Frequency range: 0.1~600A: 40Hz~400Hz
600~1000A: 40Hz~60Hz
60A
0.01A
±(2.5%reading+8)
VFD: ±(5.0%reading+10)
INRUSH: ±(5.0%reading+10)
600A
0.1A
1000A
1A
DC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
600mV
0.1mV
±(0.5%reading+5)
6V
0.001V
60V
0.01V
600V
0.1V
1000V
1V
±(0.8%reading+5)
AC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
Frequency range: 40Hz~1kHz, True RMS
600mV
0.1mV
±(0.8%reading+5)
6V
0.001V
60V
0.01V
600V
0.1V
750V
1V
±(1.0%reading+5)
VFD(750V)
0.1V
±(2.0%reading+5)
Resistance
Overload protection: 250V
600Ω
0.1Ω
±(1.0%reading+5)
6kΩ
0.001kΩ
60kΩ
0.01kΩ
600kΩ
0.1kΩ
6MΩ
0.001MΩ
60MΩ
0.01MΩ
Diode
It displays the approximate forward voltage value of the diode.
Forward DC current is about 1.5mA;
Overload protection: 250V
Continuity
Test Voltage Approx. 1V
Overload protection: 250V
Capacitance
Overload protection: 250V
10nF
0.001nF
±(4.0%reading+5)
100nF
0.01nF
1000nF
0.1nF
10μF
0.001μF
100μF
0.01μF
1000μF
0.1μF
10mF
0.001mF
100mF
0.01mF
±(5.0%reading+10)
Frequency/Duty Ratio
Overload protection: 250V
10Hz
0.001Hz
±(1.0%reading+3)
100Hz
0.01Hz
1000Hz
0.1Hz
10kHz
0.001kHz
100kHz
0.01kHz
1000kHz
0.1kHz
10MHz
0.001MHz
±(3.0%reading+3)
1~99%
0.1%
Temperature
*The below precision does not inlcude the error of thermocouple probe.
℃
1℃
±3℃ (-20℃~0℃)
±1.0% or ±2℃ (0℃~400℃)
±2.0% (400℃~1000℃)
℉
1℉
±6℉ (-4℉~32℉)
±1.0% or 4℉ (32℉~752℉)
±2.0% (752℉~1832℉)
Specifications:
Brand: HABOTEST
Material: ABS
Color: Black and Red
Item Size: 24*8*4.5cm / 9.44*3.14*1.77in
Item Weight: 321g / 11.32oz
Package Size: 27.5*13.5*5.5cm / 10.82*5.31*2.16in
Package Weight: 626g / 22.08oz
Packing List:
1 * Digital Clamp Meter
1 * Thermocouple
2 * Test Lead
1 * User Manual(English)
Logistics information
Our products are located in Hong Kong, China, and the logistics speed depends on your specific location. According to our experience, it usually takes about 15-20 days of transportation time
CONTACT US
RETURNS POLICY
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
SHIPPING
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi ut blandit risus. Donec mollis nec tellus et rutrum. Orci varius natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus. Ut consequat quam a purus faucibus scelerisque. Mauris ac dui ante. Pellentesque congue porttitor tempus. Donec sodales dapibus urna sed dictum. Duis congue posuere libero, a aliquam est porta quis.
Donec ullamcorper magna enim, vitae fermentum turpis elementum quis. Interdum et malesuada fames ac ante ipsum primis in faucibus.
Curabitur vel sem mi. Proin in lobortis ipsum. Aliquam rutrum tempor ex ac rutrum. Maecenas nunc nulla, placerat at eleifend in, viverra etos sem. Nam sagittis lacus metus, dignissim blandit magna euismod eget. Suspendisse a nisl lacus. Phasellus eget augue tincidunt, sollicitudin lectus sed, convallis desto. Pellentesque vitae dui lacinia, venenatis erat sit amet, fringilla felis. Nullam maximus nisi nec mi facilisis.
How to choose the correct size:
Step 1 Please measure your foot length carefully.
Step 2 Please choose the correct size according to your foot length and chinese size.
For example, If your foot length is 255 mm , you should choose the size 8.
