Mini Air Compressor Moisturizing spray Kit Airbrush portable high pressure water oxygen Nano Mist Sprayer Skin Care Tools 

 -Skin problems have dryness / dullness / oiliness / dry lines / peeling / acne caused by lack of water

 -Use once = five masks

 Six functions:

 -Make skin hydrated and full

 -Water lock and replenishment, nano atomization technology, penetrate into the base layer

 -Tighten the skin and replenish nutrients

 -Improve absorption and activate moisturizing factors

 -Autumn and winter prevention, with autumn and winter dry skin

 -Prevention in spring and summer, cooperate with skin oil problem

 How to use oxygen injection instrument:

 1. Water and oxygen

 Products used: mineral water / toner / toner / soft skin / pure lotion

 Frequency of use: once a day for 5-10 minutes or after spraying a pot

 2. Oxygen injection

 Products used: essence/ampoules/original solution/muscle foundation

 Frequency of use: Pour the essence into the spray bottle and dilute it into water before use

 Different skin types can match and choose different essences

 Steps for usage:

 1- Install the spray gun on the host of the oxygen injector, and then select the spray bottle capacity device on the spray gun

 2- Open the lid of the watering can and inject pure water/toner as needed (highly concentrated viscous products must be diluted with mineral water)

 3- Loosen the air jet valve to adjust the amount of fog

 4- After checking and tightening the spray bottle, move the spray gun switch back to get the fog

 Spray gun cleaning steps:

 1-Pour in clean water after use, increase the outlet valve, open and clean the spray gun together

 2- After spraying, spray for a few seconds and air-dry the internal pipes to prevent bacteria from growing

 3- Turn off the power and release the internal air completely before removing the instrument

 4- Wipe the spray can and nozzle to keep the machine clean

 Precautions

 -The product used must be a water-based product, (highly concentrated viscous products must be diluted with mineral water)

 -Inject warm water or alcohol and spray again before use (clean the inner wall of the spray gun)

 -After each use, you must pour clean water into it and clean it again, and spray it for a few seconds after spraying (to avoid blocking the spray gun and leaking due to the product freezing)

 -Do not leave the product in the bottle for a long time, and put it in as much as you need (to avoid water leakage due to clogging of the spray gun due to the product freezing)

 -After receiving the instrument, it will be fully charged and then used. It will display red when charging, and full green

 -Never use it when charging, unplug the power supply before picking it up