USB MICROPHONE

 TM-250U

FEATURES

Lightweight and small form factor for maximum audio quality with direct-to-computer connectivity

The TASCAM TM-250U was designed to deliver flawless, detailed audio straight to your computer via USB. Record voiceover or music directly to your recording software, use it for conferencing and meetings, create podcasts, stream live with pristine vocal quality, and any application where crisp clear audio is needed.

Universal adaptivity with all common recording and streaming formats

The TASCAM TM-250U works via industry-standard USB-C connectors on Windows, Mac, iOS, Android* and Chrome OS* platforms, with driverless functionality returning stream-optimized 16-bit/48kHz audio.

* Operation of this unit was confirmed using standard devices, however this does not guarantee operation with all Android and Chrome OS devices.

Built-in controls for gain, volume, and headphones

The TASCAM TM-250U microphone delivers all the control for the microphone on the unit itself. Pre-gain, output volume, and headphone output with volume control are all available on the unit. A Mic-Mute button gives additional flexibility for in-the-moment control of audio. TM-250U also support direct monitoring that diverge signals before sending them to the computer, resulting in smooth, in-time monitoring without any sound delay during both recording or live streaming.

*Please click here for setup instruction

USB C-A cable (2m), mic clip (5/8 inch), and desktop stand included

Included are essential microphone accessories: a mic holder, 6-foot USB C-A cable, and desktop mic stand - allowing you to set up on your desktop immediately.

Frequency response

Polar pattern

Features at a glance

      Plug and go; No driver installation required.

   Compatible with USB class compliant devices (USB Type C connector).

   Supports Mac OS, Windows, iOS, Android* and Chrome OS*

*Dependent on hardware/processor. TASCAM does not guarantee operation with all Android and Chrome OS devices.

   Supports 16-bit/48kHz.

   Equipped with a headphone output, supports low-latency direct monitoring for music recording or live streaming application.

   Headphone volume knob.

   Mic volume (gain) knob.

   Mic mute button.

   Robust design.

   USB C-A cable (2m), mic holder (screw diameter 5/8 inch) and desktop stand included.

             Spec description

      Element

   Condenser

       Polar pattern

   Super-cardioid

       Frequency response

   20Hz - 20kHz

       Sensitivity

   -32dB (0dB=1V/Pa at 1kHz)

       Max. SPL

   130dB (at 1kHz = 1% THD)

       Sampling frequency

       ADC

   44.1k/48kHz

       DAC

   44.1k/48kHz

       MIC/ADC audio

       THD+N

   0.01%

       S/N ratio

   89dB

       Dynamic range

   89dB

       Headphones/DAC audio

       THD+N

   0.005%

       S/N ratio

   96dB

       Dynamic range

   93dB

       Headphones

       Connector

   1/8" (3.5 mm) Stereo mini jack

       USB

       Connector

   USB Type-C

       Audio format

   USB Audio Class (UAC 1.0)

       Power

   5V USB bus power

       Dimensions

   65 mm (Diameter) × 203.4 mm (L)

       Weight

   439g(Microphone body only)

       Included items

   USB Type C-A cable (2m), Mic holder (5/8" screw diameter), Desktop stand, Owner’s manual (warranty included)