Introduction:

Smart 2 in 1 wireless pet fence is the newest product in market, design is

very novelty and combine training collar with wireless pet fence, it’s easy for

operating and mode switch.

It can be used on table or outside and it is effective to train pet developing good

habits.

Characteristic:

1. 2 in 1 function；LED display, Wireless pet fence &Remote control (Beep+

Vibration + Shock )

2. LED display 5 levels signal fence distance(According to the environment, there

will be a gap of ± 16ft )

100 feet, 200 feet, 300 feet, 500 feet, 990 feet

3. Both transmitter and receiver are rechargeable. The receiver is waterproofand dustproof.

4. Reflective fluorescent TPU collar, improve the safety at night.

5.Use with silicone sleeve to prevent pets from directly touching the metal.Wireless pet fence mode:

1. No Need pairing between transmitter and receiver，it can work directly afterpower on;

2. One transmitter can connect up to 5 receivers in fence mode.

Remote control dog training mode:

1. Pair the code：Can control 3 dogs same time, 1 for 1st dog, 2 for 2nd dog,

3 for 3rd dog. you can see the method in “How to pairing Transmitter andReceiver”，

2. 3 function:Sound,Vibration,Shock in training mode. 

3. Vibration and shock feature has a 1-3 level. The lower number indicates weaker, the larger the number, the stronger the intensity, please press “+” or “-” to adjust.

How to Test:

Before using please fully charged and use method of 1+2 below to confirm it

working or not (Shock test need use the LED Test Light Tool).

1. After Power on the Transmitter and Receiver, then power off the transmitter,

the receiver will launch bi-bi-bi always.

2. In the training mode, press “Beep, Vibration or Shock” button to test.

Working Principle:

1. Receiver will not work among setting distance, will work as below when exceedthe range.

2. When dog not in the range, Receiver working modes as below: 1--2--3(indicator light flashing)

1). Sound 5 seconds,; 2).Vibration 5 seconds; 3).Sound& vibration at same time for 6 seconds.

4). Shock 5 seconds; 5). Sound& Shock at same time for 6 seconds 

3. After 5 working modes, it will launch di-di-di sound always. Thereceiver willnot work 

until the dog return to the setting distance range or presspower Off.

4. After 5 minutes of static, it will enter standby mode.

5. After the second no signal 5 second delay work.

Function Operation:

1. When “100/200/300/500/990”displayed on screen, it is in wireless fence mode.press MODE button switch to dog training mode, in dog training mode, LEDdisplay “001”，“002” or “003” means for 1,2,3 dogs.Sound function display 1; vibration and shock function 1-2-3Level can adjust different strengths.

2. In dog training mode can remote control 3 dogs at same time, press ‘+’ or ‘-’button to change control which dog. There are 3 functions on the right of the panel:sound, vibration, shock.

Wireless fence using guide:

1. Support 5 dogs in maximum, the biggest straight line radius is 990ft, wireless fence and as center of the transmitter.

2. When dog exceed the setting range, receiver will start working mode

automatically. (refer to the working modes at “Working Principle” ).

3. Please keep the Transmitter always power on, if not, After 2 cycles of working modes, 

it will launch di-di-di sound always.

Dog training using guide:

1. The biggest straight line distance is about 990ft for dog training collar.

2. 3 dogs can be remote controlled mean while, LED display “001”Means the first

dog, “002”for the second dog,“003”for the third dog，

3. Independent “sound”，“vibration”，and“shock”3 function for options. The vibration and shock functions have 1-3 Level adjustments, and press “+” “-” to adjust.Vibration” and “Electric Shock” The greater the number, the stronger the intensity.

Attention:

l It will affect distance and using when low power.

l Emitters should be placed outdoors to avoid affecting the distance, low power will affect the use of distance

l Please keep the Transmitter always power on, if not, the receiver will go toworking mode, shock your dogs two times, and bi-bi-bi always.

The original packaging has been paired at the factory. If you purchase additional collars, the dog training equipment must be paired before use.

Package List:

1 x Collar

1 x Transmitter

1 x Receiver

2 x Long Electrode Tip

2 x Short Electrode Tip

2 x Long Electrode Sleeve

2 x Short Electrode Sleeve

1 x Data Cable

1 x Plug

2 x Screw

2 x Screw Cover

1 x Test Light

1 x Manual