Specification:

 Product Name: Oxygen Injector

 Color: Gradient pink/gradient blue/gradient purple

 Material: ABS

 Applicable skin type: any skin type

 Power input: 5V1A

 Charging time: 4H

 Battery capacity: 3000mAh

 Ambient temperature: 0°C-40°C

 Use time: 4H

 Rated power: 5W

 Precautions:

 1. The products used by the spray gun must be water-based products (highly viscous products must be diluted with mineral water)

 2. Before use, inject warm water or alcohol to clean it (clean the inner wall of the gun)

 Tips:

 High concentration products such as essence and linear serum are prepared in a ratio of 1:10, and the use effect is better.

 If the water is too thick, it will cause clogging or poor effect. Water-based skin care products are recommended.

 Say goodbye to surface hydration

 130KPA high pressure oxygen injection deep nourishment

 Deep into the bottom of the skin, let you bloom hydrated skin 24 hours

 Nano water mist

 Double absorption through muscle base.

 0.3MM ultra-micron mist spray

 Visible moisturizing power

 One spray is light and delicate, moisturizing everything,

 Covers the skin evenly

 dense soft mist.

 10 minutes a day

 Get radiant skin with ease

 The fine nano-scale high-pressure oxygen injection can replenish moisture deep in the skin, bringing the effect of moisturizing and hydrating.

 Directly to the bottom of the skin

 Nano oxygen injection is more absorbing.

 High pressure oxygen injection to wash the skin

 Just like a cleaning spray gun, the oil accumulated on the face is washed with high pressure, the more hydrated and clean the pores, the more efficient the absorption of nutrients.

 * Put nutrients into the small cup of the spray gun, and inject water and oxygen into the human skin at high speed through strong pressure.

 Micromolecules reach the bottom of the muscle

 The oxygen injection device can make the liquid into nano-scale, forming a fine mist with pressure, so that the skin can be deeply hydrated. Improve the absorption of lotion and essence to 20 times that of ordinary smear.

 Built-in Type-C charging port

 Keep the oxygen meter running at any time

 You can charge the oxygen injector with a power bank, computer, etc.

 Specification

 Product Name: Water Replenishment Meter

 Water tank capacity: 30ml

 Battery capacity: 500 mA

 Working voltage: 3.7V

 Charging voltage: DC 5V/0.5A

 Spray mode: cold spray

 Material: ABS+PC+silicone+electronic components

 color: White. Pink, black, silver

 Fog time: irregular (switch control)

 Power on and off: press twice to turn on, and press once to turn off

 Charging tips: blue light for work, red light for charging (flashing), red light for full charge (long on) (full charge in about 2 hours)

 Note:

 Do not add oily or water-insoluble substances.

 Package

 1 x Sprayer

 1 x USB

 1 x Manual