10 MHz to 8.0 GHz Frequency Range.

      For isotropic measurements of electromagnetic fields.

      Non-directional (isotropic ) measurement with three-channel measurement probe.

      High dynamic range due to three-channel digital results processing.

      Configurable alarm threshold and memory function.

      Easy to use

                     High frequency (RF) electromagnetic wave field strength measurement.

      Mobile phone base station antenna radiation power density measurement.

      Wireless communication applications (CW , TDMA , GSM , DECT).

               Wireless LAN (Wi-Fi) detection, installation.

      Camera, wireless bug finder.

      Cellular/Cordless phone radiation safety level.

      Microwave oven leakage detection.

      Personal living environment EMF safety.

      RF power measurement for transmitters.

   ELECTRICAL SPECIFICATIONS: 

               Sensor Type

     Electric Field (E)

             Frequency Range

     10MHz to 8.0 GHz

             Directional Characteristic

     Isotropic, 3-dimensional

             Measurement Range (CW signal>50MHz)

     20mV/m to 108.0V/m

             Absolute Error(@1V/m and 50MHz)

     ± 1.0dB

             Frequency Response (taking into account typ. CAL factor)

     ± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)

             Isotropy Deviation

     Type. ±1.0dB f>50 MHz

             Overload Limit

     4.2W/m2 (40 V/m)

             Temperature Response(0 to 50 )

     ± 1.5dB

             Note

     Unless otherwise stated, all specifications hold under the following assumptions:

Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ±3 ;relative air humidity 25% to 75%.

   GENERAL SPECIFICATIONS: 

               Measurement Method

     Digital , triaxial measurement

             Directional Characteristic

     Isotropic, triaxial

             Measurement Range Selection

     One continuous range

             Display Resolution

     0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²

             Setting Time

     Typically 1s ( 0 to 90% of meas. value)

             Display Refresh Rate

     Typically 400mS

             Display Type

     LCD 4 digit

             Audible Alarm

     Buzzer

             Measurement Units

     mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²

             Measurement Display Value

     Instantaneous measured value, maximum value or average value since power-on.

             Measurement Average Time (In Per-set Steps)

     4s to 15 minutes

             Measurement Alarm Function

     Adjustable threshold with ON/OFF

             Measurement Calibration Factor CAL

     Adjustable

             Manual Data Memory and Read Storage

     99 sets ( only recall by meter )

             Battery

     9V

             Battery Life

     >15 Hours

             Accessory

     Built-in Lithiumbatteries,Power Adapter,carrying case & manual