Feature: 

 1. Using stepper motor drive pointer, precisely display the engine speed, with high indication accuracy, relatively simple driving and control. LCD display, clearly displays the mileage. 

 2. IP67 waterproof and dustproof, 316L stainless steel bezel, corrosion‑resistant, durable to use even in acid, alkali and humid environments. Curved glass, good anti‑fog effect. 

 3. Stepper motors used for full range of stepping gauges, with low power consumption, long lifespan and high accuracy. 9‑32V ultra‑wide long‑term working voltage, and maximum up to 36V (≤1 minute)). 

 4. With a snap together with the harness connector to achieve the best and secure connection, so that the pressure gauge can work normally even under strong vibration. 

 5. Suitable for all kinds of vehicle modification, and can be used for engine/generator sets, ships, construction machinery, agricultural machinery, automobile modification, etc.   

   Specification: 

   ItemItem Type: GPS Speedometer 

   Material: Stainless Steel 316L Bezel + Anti-Fog Glass

 Color: Black Dial Black Bezel  

 Installation Diameter: 85mm or 3-3/8in 

 Indication Range:0-200KM / H, 0-999999KM 

 Input Signal: GPS Signal 

 Backlight Color: Red  

 Operating Voltage: 9-32VDC（12V,24V） 

 Operating Current: ≤60mA 

 Operating Temperature: -30℃ - +75℃ 

 Storage Temperature: -40℃ - +85℃ 

 Protection Class: IP67, can work underwater 1m position 

 Connection Method: Red wire connect positive pole, blue wire connect negative pole, orange backlight wire connect positive pole 

 Installation Notes: 

 1. Open a hole with a diameter of 85mm on the panel (your cabin panel and instrument panel), insert the instrument into the hole, the panel corresponding to the instrument panel is marked with a boss, and make a small notch at this position, To ensure that there is at least 85mm (3 3/8in) instrument panel on the back of the instrument 

 2. After installing the instrument into the panel, screw down with the fixing  

 3. Connect the wires, the instrument shell is directly connected to the 12/24V power supply 

 4. Insert the wire harness and fix it firmly on the table   

   Package List: 

   1 x GPS Speedometer 

   1 x GPS Speed Sensor 

   1 x Power Harness 

   1 x Manual