MECHANIC 14 Inch Touch Screen Separator Machine Built-in Double Vacuum Pump MCN-1929 For iPad Mobile Phone LCD Repair Separation

 Product Features:

100% MECHANIC 

100% New

Input voltage: 220V

Power：800W

Product Size: 390*255*140mm

Maximum support 14 inch LCD screen

1: Thickened aluminum alloy panel, size295*190mm

2: Double insurance design, more secure

 Dear buyers: Because we hope the products more perfect, product packaging and appearance in constantly updated. So you receive products shall prevail. You received only will be better! Thanks for understanding!

 LCD screen vacuum separator is suitable for tablet/mobile screen separation

 Double air pump suction is more powerful, vacuum double air pump, strong suction, simple operation, press the suction switch to start the adsorption function, iPad/mobile phone

Thicker aluminum alloy panel, all mobile phone screens within 7 inches are detachable, uniform heating, stable performance, high temperature non-deformation, etc.

Double fuses have high safety performance, insulation material design, anti-leakage, there is a spare fuse under the socket, easy to replace

Diamond wire is moved in position, rounded corner design is adopted on both sides of the separator, and the diamond wire is used to move in position, which is not easy to break.

Imported powerful double air pump, built-in imported vacuum pump with enhanced suction force, stable adsorption, more convenient for maintenance masters to separate screen operation.

Newly upgraded double pump separator

The product upgrade can store temperature for three uses, which is convenient for personal habitual operation, and is more convenient. It has a wide voltage, low noise, built-in and enhanced double vacuum pumps, and can be used when charging.

Steps

step 1.

Place the enhanced adsorption rubber silica gel pad in the working area of dismantling the screen and align the holes

Step 2

Turn on the power, set the machine to a suitable temperature, it is recommended to adjust the temperature to 80° to be too high and it may burn the screen

Step 3

When the separator enters the constant temperature, put the screen that needs to be decomposed into the work area, place it in the direction of the cable, turn on the vacuum adsorption button, and start preheating for 5-10 minutes

Step 4

Take out the installed diamond wire split screen stick, adjust it to a proper length, split the screen to help, split the screen from top to bottom, repeat back and forth twice, until the screen is loose and can be taken out