Name: Beauty Spot Mole Pen

Battery: 800mAh 3.7V

   Input current: 5V/1A

Output power: MAX5W

   Material: ABS + steel needle

Product size: 175*28mm

   Product weight: 78g

Packing size: 194*96*36mm

   including packing weight: 200g

   Features:

   1. Through the microcomputer control conversion, the voltage is instantly discharged into the principle of high temperature carbonization of electric ions, and the dark pigment and dermal tissue on the skin surface can be quickly removed without pain and bleeding.

   2. Type_c charging, over-discharge protection, automatic power-off is safe and reliable. Small and easy to carry. The LCD display shows the gear position and battery level, which is intuitive to the grade

   Operation introduction:

●Assemble the needle: Clean the needle and skin with alcohol, and ｉｎｓｅｒｔ the thick needle clockwise into the needle tip hole, ｉｎｓｅｒｔ the fine needle into the needle guard first, and ｉｎｓｅｒｔ the needle guard needle into the hole clockwise.

●On key: Press and hold the switch (ON/OFF) for 2 seconds to turn on, the display will light up to show the battery level, and then hold down the (ON/OFF) key for 2 seconds to turn off. In the power-on state, without any operation, it will automatically shut down after 10 minutes.

●Gear shift key: After powering on, press the (ON/OFF) key once to switch gears once, and continuously press the (ON/OFF) key to switch from gear 1 to gear 6, indicated by the number 1.2.3.4.5.6. Stalls.

●Lighting spotlight button: After powering on, double-click the (ON/OFF) button to turn on the spotlight, and double-click the (ON/OFF) button again to turn off the spotlight.

●Discharge: After selecting the gear, you must hold down the (OUT) button to discharge, and at the same time, the work indicator lights up. Release the button and it will not discharge, and it is in the standby state. Press for 2 minutes and then it will be in standby mode automatically.

●Charge:

1. Use the 5V/1A adapter (the adapter needs to be purchased by the customer), connect the charging cable to the adapter and the mole pen, and the working indicator of the mole pen flashes green at this time.

2. The working indicator is steady green after being fully charged (charging time is about 2 hours)

Do not charge during work, do not overcharge or charge when the battery is exhausted, otherwise the battery life will be affected

   Packing list:

Host *1

Accessories: Fine needle *10

Thick needle (including needle cover) *3

Manual *1

USB data cable*1