Feature: 

 1. When diving to take pictures, the deeper the dive, the weaker the light will be. This product is equipped with a powerful fill light. 

 2. The fill light battery life can last for 100 minutes, and the battery's standby time can last for 15‑20 days, so you can capture invisible creatures in the deep sea. 

 3. Provides 800lm of strong light and LED light with 130° illuminance and 5800‑6500K color optimization, which is very suitable for underwater photography, provides the clearest guarantee for photos and videos, and retains the vividness of the underwater world. 

 4. The functions of the camera are auto focus, manual focus, exposure compensation, zoom in and out, shutter adjustment, ISO adjustment, white balance adjustment. 

 5. Made of high quality aviation aluminum alloy, durable and can withstand underwater pressure.   

   Specification: 

   Item Type: Diving Waterproof Cellphone Housing

 Material: Aviation Aluminum Alloy

 Inbuilt Battery: 3500mAh Polymer Lithium Battery(Included)

 App Compatible System: For Android Phone and for iOS Phone

 Color Optimization: 5800-6500K

 Luminous Flux: 800lm Fill Light

 Light Intensity: 130°

 Fill Light Service Life: 100Min

 Battery Standby Time: 15-20 Days

 Bluetooth Connection, Physical Button

 Mode: Support switch to front camera, and switch between scuba and skin dive mode.

 Weight: Approx. 1294g/2.9lb 

   Package List: 

   1 x Waterproof Cellphone Housing 

   1 x Instruction 

   1 x USB Cable 

   1 x Silicone Oil 

   1 x Anti-lost Lanyard 

   1 x Storage Box 

   1 x Waterproof Rubber Circle 

   1 x Non-dust Cloth 

   Note: 

 The thickness of the phone cannot exceed 10MM 

 How to use:   1: Raise the red button and rotate it 90 degrees clockwise 

   2: Remove the o‑ring, make sure that there is no foreign matter, apply lubricating oil evenly, and then reload it into the diving shell 

   3: Turn on the ON switch 

   4: Turn on the mobile phone scan function to scan the QR code in the phone case and install the APP 

   5. Turn on the bluetooth of the mobile phone, open the software and click TO Dive to  up the device information, click on the device 

   6. Put the mobile phone into the diving case, turn off the exhaust valve cover, tighten the OPEN button, and press the component until the red light turns on  

   7: Press and hold the LED button for 3 seconds to start the air extraction mode until the red light turns green, and the air extraction mode will automatically stop and restart. Tighten the exhaust cover 

           The thickness of the phone cannot exceed 10MM.Please note that the new type and old type of this product will be sent randomly,and make sure you will not mind before ordering.