Features：    

 [HIGH PERFORMANCE] Our metal detector adopts excellent chip and system, can scan and test conveniently and quickly, with high sensitivity and stability, improves work efficiency.    

 [IDENTIFICATION FUNCTION] The detector can identify specific types of metal through the frequency regulator, which can help you easily find the metal object you want.    

 [ACCURATE POSITIONING] With a remote search system and an accurate position detection system, the metal finder could accurately determine the position of the object.    

 [DETECTABLE OBJECTS] The detector can be used to detect gold, silver, copper, conventional metals, stones, such as diamond, emerald, etc.    

 [WIDE USAGE] In addition to military applications, the detector can also be used for safety inspection, archaeological exploration and mineral exploration.    

 Specification：    

 Item Type: Metal Detector    

 Material: Aluminum Alloy    

 Detector Lithium Battery (Built in): Rechargeable lithium ion battery, 9.6V, 800mAh    

 Receiver Lithium Battery (Built in): Rechargeable lithium ion battery, 9.6V, 800mAh    

 Power Adapter Voltage: AC 100-240V    

 Use: In addition to military applications, it is also widely used for safety inspection, archaeological treasure exploration and mineral exploration    

 Technical Parameters:    

 1. Search Range: Approx. 1-99m/3.3-324.8ft    

 2. Detection Depth: Approx. 16m/52.5ft    

 3. Transmission Frequency: 5.6-6KHz    

 4. Signal Frequency: 360-440Hz    

 5. Scannable metals include gold, silver, copper, and stones with high metal content. Other metals cannot be detected    

 6. The product is equipped with degaussing function (degaussing can be achieved when the probe of the receiver closes to the ferrous metal and the alarm is given three times)    

 7. Detected Objects: Gold, silver, copper, diamond and various stones    

 How to Use：

 1. Hold the instrument, scan slowly in an arc, and turn yourself together. At this time, the explorer's elbow should always be close to both sides of the body, turn about 40 degree to 60 degree. Note: The explorer must rotate slowly and keep the body stable.    

 2. Standardize your scanning action. First of all, let the receiving antenna properly extend and open. Make the receiving antenna right in front of you, open at 90 degree with your body, cannot deflect to the left and right sides.    

 3. When the antenna is aimed at the target, the instrument will determine the direction, when you think this determination is effective, remember this direction, and then, move the instrument about 10 meters to the left or right, and repeat the process of determining the target. Observe the determined direction this time, the intersection of the two directions is the target position.    

 4. If you think there is a certain deviation in the specific direction measured just now, you can determine it from another viewpoint. If the target is within 10 meters, you should walk slowly and steadily along a fixed route. When you pass the target and are directly above it, the antenna of the instrument will shake on both sides. At this time, the measured position is very accurate.    

 5. Please refer to the manual for specific operation.    

 Package List：    

 1 x Metal Detector    

 1 x Receiver    

 2 x Signal Rod    

 1 x Adapter    

 1 x Headset    

 3 x Screw    

 1 x Manual    

 1 x Storage Box